Hackintosh: macos-10.9 mavericks

There are 3 tools involved in the installation of OSX

• Chimaera - bootloader
• Unibeast - USB installation tool
• Multibeast - Drivers/install tool for Chimaera bootloader

OSX must be installed to a GUID managed partition. This means that OSX must format the drive (the entire drive), you cannot use the existing MBR managed partition that windows and linux use. You can format other sections of the hard drive afterwards, of course leaving the OSX partition intact.

the Unibeast bootable USB stick must be in a usb2.0 port mounted directly to the board. You cannot use usb3.0, or the usb2.0 ports on the front of your computer.

Unibeast USB creation

This creates your OSX install media.

UEFI(Bios) Settings

### Peripherals:
* XHCI -- Auto
* XHCI HandsOff -- Enabled
* EHCI HandsOff -- Enabled
* InitDisplayFirst -- IGFX (uses intel integrated graphics)

### Power Management:
* HighPrecisionEventTimer -- Enabled

Installation

PCIRootUID=0 GraphicsEnabler=No -v -x</pre>

* Select English
* From top menu, choose UTILITIES / DISK UTILITY
** choose a disk to format (cannot simply format a partition - OSX requires GUID partition format) with the following settings:
*** GUID partition
*** Mac OS Extended(Journaled)
* Finish Installation and reboot

* F12 on boot
* Boot from Sandisk
* Move to select Mountain Lion but again, do not hit enter
** Type: <pre>PCIRootUID=0 GraphicsEnabler=No -v -x</pre>
* Once OSX starts up, download Multibeast

MultiBeast

MultiBeast is a tool to install special hackintosh drivers onto your hackintosh.
http://www.tonymacx86.com/downloads.php?do=cat&id=3

Mavericks

#### Quick Start
- DST-free install

#### Drivers
## Disk

## Audio
Realtek ALCxxx > ALC898

## Graphics
Intel 9 Series HD4600 Graphics Fix (enables 3x monitor!!, requires reboot)

## Misc

## Network
Intel   > AppleIntelE100e v3.1.0		(TOP ethernet port)
Atheros > ALXEthernet v1.0.2			(BOTTOM ethernet port)

## System

#### Bootloaders
Chimera

Yosemite

#### Quick Start
- DST-free install

#### Drivers
## Audio
ALC898

## Networking
ALXEthernet v1.0.2 (Settings > Audio > Output (Tab) > Line Out )